Tempfil-G

 

MSDS

 

Product Description
Tempfil- G are temporary filling materials self-curing under humidity for temporary filling of cavities.The final hardness of the three variants decreases in the sequence of listing. Tempfil- G can be removed in one piece without residue. Not all products are available in all countries.
These Instructions for Use should be kept for the duration of product use.
Application
• Use an instrument to fill the required quantity into the wet cavity.The hardening process starts after a few minutes. Avoid any exposure to chewing pressure for about 2 hours after application.
• Deep cavities need not be filled completely. If the material is used to close up a drug, pressure-free application is recommended.
• Use rotary instruments to remove the temporary filling. Remove the Tempfil- G filling with a stiff probe.
Note • Due to sensitivity to moisture, close the tube or jar immediately after removing the material, since otherwise the viscosity of the material increases (due to the entry of moisture), and the material may no longer be extractable.
Storage and Shelf-life
Store the product at 15-25° C/59-77° F. Store the product in a dry place. Do not use after the expiration date. Use open tubes and/or screw-cap jars as soon as possible.
Customer Information No person is authorized to provide any information which deviates from the information provided in this instruction sheet.
Shivam Industries warrants this product will be free from defects in material and manufacture. User is responsible for determining the suitability of the product for user’s application. If this product is defective within the warranty period, your exclusive remedy Shivam Industries shall be repair or replacement of the product.
Information valid as of October 2015.